Replaces the leak prone factory hose based return system with solid rails and includes Viton O-rings.
-1/8-27 pipe threads at the ends and rail centers makes for a customizable setup.
-Comes with “Push Lok” Hose and Fittings.
Reviews (19)
19 reviews for Billet Injector Fuel Return Rails
Rated 5 out of 5
Phillip Merjil (verified owner)–
The rails take some time to install but patience is key. It took me two attempts and a whole day to get it right but it looks amazing and works great. Very satisfied.
Rated 5 out of 5
Weston Wright (verified owner)–
I did my install on a factory turbo motor in the truck and had no problems- what an outstanding upgrade. I would say maybe 2-3 hours from opening the hood to firing it back up. I am highly satisfied with how these look once installed. What a great product!
Rated 5 out of 5
Kagunn Hardy (verified owner)–
I put these on when the heads were off for gaskets and studs, they went on supper easy, defiantly a quality product, I used red scotch-brite to clean up the holes for any sneaky burs but are defiantly going to clean up the engine bay.
10/10 will be using on all future IDI builds
Rated 5 out of 5
Miles Hemingway (verified owner)–
These rails are awesome. Easy to install, quality product.
Rated 5 out of 5
Joseph Clemenson –
Got a set of these 2nd hand from a friend. Easy install, complete kit with all the new o-rings is a huge help. Solved all my air intrusion problems, and my 6.9 runs so much better. 11/10 will recommend to others
Rated 5 out of 5
Michael Kline (verified owner)–
Once again they are as advertised, the quality and fitment is amazing. The fact that they are the only upgrade out there says alot about r&d idi’s commitment to the idi engines and what they offer as a company. Very pleased with my purchase.
Rated 5 out of 5
Thomas (verified owner)–
Well spent money. no more air intrusion and makes the engine bay look nice.
Rated 5 out of 5
Charles Smith (verified owner)–
I have been waiting for years for someone to make these rails. Install is easy easy. All parts needed came in package I can’t say enough how great full I am for these guys and their parts one of these days I am gonna have them build me a whole engine.
Rated 5 out of 5
terry griffith –
I should have bought these rails years ago
I thought they was kinda high priced I was wrong
worth every penny
every time I worked on my truck and bump one of those plastic caps it would start leaking THANK YOU for these rails if you have 6.9 or 7.3 this is a must have thanks again
Rated 5 out of 5
Mike MacDonald –
Just installed these on my 93 IDIT, I had a couple of minor issues, mainly because I’ve never installed these before. They look great and work great. Definitely recommend them.
Rated 5 out of 5
Cody Walker (verified owner)–
Fantastic product. Easy install. First time dealing with these folks and I look forward to using them again!
Rated 5 out of 5
Nathan (verified owner)–
These rails are worth every penny, and some. Clear install instructions, all the fittings you could need, and extra o-rings. This kit all but completely eliminates the common air intrusion issues on the return side.
Take your time. Clean all the injector bores with a little scotch bright to insure you wont nick an o-ring, and MAKE SURE to use a good lubricant. I found these install the best if you install all of the injectors into the rail first, then tighten them to the engine evenly little by little, while maintaining positive pressure on the rail.
Rated 5 out of 5
Dacota Dossett –
Love these rails look amazing cleaner and there less leak prone then them ugly stock caps. Does take time to install but well worth the effort. Looking forward to buying more products from r&d
Rated 5 out of 5
Jake –
Love these rails compared to the OE style hoses and caps. Really streamlines the look of the engine topside. Be sure to follow the install instructions and make sure everything is clean and well lubed. I installed these rails twice(through no fault of their own, I had issues that needed to be addressed without the rails in the way) once on my engine stand, and another after engine installation. Followed instructions both times and after an hour or so of runtime no leaks have presented themselves.
Rated 5 out of 5
Chad Decker –
Fast shipping & outstanding quality. Thank you Justin for the help and professionalism ! I’m really looking forward to ordering the injectors & downpipe when available to keep this truck running strong.
Rated 5 out of 5
Scott Neville –
UPDATE On my rating of these rails. I purchased them in Feb 2019. I had to shorten the drivers side slightly with my engine/truck package. 94 IDI-T Code K with bigger alternator, and tensioner pully with shocks. Appx 3/4 of a inch. Re-tap the ends and good to go.
The reason for my update. I had a fuel selector fail on the return side, and it was overfilling my front tank to the point it was leaking from the fuel sender ring, and even was weeping from around the electronics. The engine barely ran, and blue smoke poured out at idle.
THe IDI Rails… NOT A DROP. They DIDNT leak. The return side of my engine was highly pressurized, but the rails DIDNT leak.
(I replaced the selector, put in a new sending unit and it was perfect.)
I have removed the rails 2 times since purchase, and they went back on fine with no leaks, nor need to replace the orings.
Best purchase ever for my OBS.
Rated 5 out of 5
Scott S (verified owner)–
Just recently installed these rails on my 1994 7.3L NA IDI. No leaks and no air intrusion!! The old Ambulance fires right up without any hesitation! I’m very happy with my purchase!
Rated 5 out of 5
Jay Gonzales (verified owner)–
The rails were time consuming, but well worth it. They’re machined super well, they don’t leak if they’re installed properly. Makes the engine bay look 10 times better and more clean than the leaky, plastic caps. 10/10. Heavily recommend. And Justin (R&D owner) is super helpful and patient.
Rated 5 out of 5
Jay Gonzales (verified owner)–
I heavily recommend these over the crappy stock plastic ones. They’re machined super well, they make the engine bay look 10 times better. If you’ve got air intrusion, and you’ve replaced the fuel lines, buy these. Not the factory junk. 10:/10. Just follow the instructions and take your time. Justin has some fantastic parts for these trucks/vans. Well worth the money.
Phillip Merjil (verified owner) –
The rails take some time to install but patience is key. It took me two attempts and a whole day to get it right but it looks amazing and works great. Very satisfied.
Weston Wright (verified owner) –
I did my install on a factory turbo motor in the truck and had no problems- what an outstanding upgrade. I would say maybe 2-3 hours from opening the hood to firing it back up. I am highly satisfied with how these look once installed. What a great product!
Kagunn Hardy (verified owner) –
I put these on when the heads were off for gaskets and studs, they went on supper easy, defiantly a quality product, I used red scotch-brite to clean up the holes for any sneaky burs but are defiantly going to clean up the engine bay.
10/10 will be using on all future IDI builds
Miles Hemingway (verified owner) –
These rails are awesome. Easy to install, quality product.
Joseph Clemenson –
Got a set of these 2nd hand from a friend. Easy install, complete kit with all the new o-rings is a huge help. Solved all my air intrusion problems, and my 6.9 runs so much better. 11/10 will recommend to others
Michael Kline (verified owner) –
Once again they are as advertised, the quality and fitment is amazing. The fact that they are the only upgrade out there says alot about r&d idi’s commitment to the idi engines and what they offer as a company. Very pleased with my purchase.
Thomas (verified owner) –
Well spent money. no more air intrusion and makes the engine bay look nice.
Charles Smith (verified owner) –
I have been waiting for years for someone to make these rails. Install is easy easy. All parts needed came in package I can’t say enough how great full I am for these guys and their parts one of these days I am gonna have them build me a whole engine.
terry griffith –
I should have bought these rails years ago
I thought they was kinda high priced I was wrong
worth every penny
every time I worked on my truck and bump one of those plastic caps it would start leaking THANK YOU for these rails if you have 6.9 or 7.3 this is a must have thanks again
Mike MacDonald –
Just installed these on my 93 IDIT, I had a couple of minor issues, mainly because I’ve never installed these before. They look great and work great. Definitely recommend them.
Cody Walker (verified owner) –
Fantastic product. Easy install. First time dealing with these folks and I look forward to using them again!
Nathan (verified owner) –
These rails are worth every penny, and some. Clear install instructions, all the fittings you could need, and extra o-rings. This kit all but completely eliminates the common air intrusion issues on the return side.
Take your time. Clean all the injector bores with a little scotch bright to insure you wont nick an o-ring, and MAKE SURE to use a good lubricant. I found these install the best if you install all of the injectors into the rail first, then tighten them to the engine evenly little by little, while maintaining positive pressure on the rail.
Dacota Dossett –
Love these rails look amazing cleaner and there less leak prone then them ugly stock caps. Does take time to install but well worth the effort. Looking forward to buying more products from r&d
Jake –
Love these rails compared to the OE style hoses and caps. Really streamlines the look of the engine topside. Be sure to follow the install instructions and make sure everything is clean and well lubed. I installed these rails twice(through no fault of their own, I had issues that needed to be addressed without the rails in the way) once on my engine stand, and another after engine installation. Followed instructions both times and after an hour or so of runtime no leaks have presented themselves.
Chad Decker –
Fast shipping & outstanding quality. Thank you Justin for the help and professionalism ! I’m really looking forward to ordering the injectors & downpipe when available to keep this truck running strong.
Scott Neville –
UPDATE On my rating of these rails. I purchased them in Feb 2019. I had to shorten the drivers side slightly with my engine/truck package. 94 IDI-T Code K with bigger alternator, and tensioner pully with shocks. Appx 3/4 of a inch. Re-tap the ends and good to go.
The reason for my update. I had a fuel selector fail on the return side, and it was overfilling my front tank to the point it was leaking from the fuel sender ring, and even was weeping from around the electronics. The engine barely ran, and blue smoke poured out at idle.
THe IDI Rails… NOT A DROP. They DIDNT leak. The return side of my engine was highly pressurized, but the rails DIDNT leak.
(I replaced the selector, put in a new sending unit and it was perfect.)
I have removed the rails 2 times since purchase, and they went back on fine with no leaks, nor need to replace the orings.
Best purchase ever for my OBS.
Scott S (verified owner) –
Just recently installed these rails on my 1994 7.3L NA IDI. No leaks and no air intrusion!! The old Ambulance fires right up without any hesitation! I’m very happy with my purchase!
Jay Gonzales (verified owner) –
The rails were time consuming, but well worth it. They’re machined super well, they don’t leak if they’re installed properly. Makes the engine bay look 10 times better and more clean than the leaky, plastic caps. 10/10. Heavily recommend. And Justin (R&D owner) is super helpful and patient.
Jay Gonzales (verified owner) –
I heavily recommend these over the crappy stock plastic ones. They’re machined super well, they make the engine bay look 10 times better. If you’ve got air intrusion, and you’ve replaced the fuel lines, buy these. Not the factory junk. 10:/10. Just follow the instructions and take your time. Justin has some fantastic parts for these trucks/vans. Well worth the money.